Front Bumper Skid Plates from ProTEKt
2005-2013 C6, Z06 and Grand Sport Corvette
Front Bumper Protection Skid Plates
SCRAPE THE PLATE - NOT YOUR PAINT!
Tired of scraping your front bumper cover on every curb and driveway in town? Protect your valuable paint with a lightweight, easy to install ProTEKt skid plate for your front bumper. Each kit is precision CNC machined to install under the lower bumper lip and uses factory mounting holes to minimize drilling and make installation easy. Let the replaceable ProTEKt skid plates take the beating and wear so that your paint stays pristine.
Taking the "Ouch" out of "Watch Out!"
ProTEKt Skid Plates attach to the underside of your front bumper to protect your valuable paint and factory front bumper cover, while blending perfectly with the bumper contours, for a factory, OEM look. Machined from ultra-durable High Density Polyethylene, our plates will never wear out and are guaranteed for life. This slippery material lowers friction, so your bumper slides easily over bumps and surfaces, and minimizes stress on bumper mounting tabs, reducing damage, wear and tear. Each skid plate set is designed to be application specific, for an exact fit that helps to maintain factory ground clearance. Our easy installation kits come complete with all necessary stainless steel hardware, and do not require any special tools or equipment. Our products are all designed, engineered, and manufactured in the USA.
Guaranteed for Life!
ProTEKt skid plates are made from 3/8" thick marine quality high density polyethylene. This material was chosen for its superior outdoor performance, temperature stability, low coefficient of friction, and extremely high wear resistance. High density polyethylene is commonly used in industry, as a replaceable wear spot on moving production lines, conveyor systems, and in automotive and motorcycle chain guides.
All hardware is full stainless steel for long term corrosion resistance, with nylock nuts for added security. Also, only metric (M6x1) nuts and bolts are included, to properly match the existing hardware on all modern cars.
With ProTEKt SkidPlates, you will have peace of mind that your precious paint and front bumper are protected during your daily, or not so daily, drive. If your skid plates wear out, contact us and we will replace them for life!
This skid plate kit is secured using supplied fasteners.
All needed hardware is included. Drilling is required.
1. Position the skid plate on the underside of the front bumper cover andsecure with low tack tape, ie., blue painter’s tape (may refer to imageson website for positioning if needed)2. Lubricate bolts (recommended to avoid thread galling)
3. Drill the bumper cover using a ¼” drill bit wherever there is a skid platehole
4. Install the bolts, nuts and washers. Some disassembly may be requiredto access the inside of the bumper cover
DO NOT OVER TIGHTEN THE BOLTS THAT SECURE THE ProTEKt SKID PLATES TO THE BUMPER!EXCESSIVE BOLT TORQUE CAN CAUSE FAILURE OF THE BUMPER COVER OR THE SKIDPLATES!