{"product_id":"c3-1968-1972-chevrolet-corvette-exhaust-hanger-kit-2-1-2-inch-pipe-automatic-tra-2188","title":"C3 1968-1972 Corvette Exhaust Hanger Kit - 2-1\/2 Inch Pipe - Automatic Transmission","description":"\u003cdiv\u003e\n\u003cp\u003eGive your classic C3 Corvette the secure, quiet exhaust setup it deserves. The C3 1968-1972 Chevrolet Corvette Exhaust Hanger Kit is a purpose-made replacement for the exhaust mounts on 1968–1972 Corvettes with a 2 1\/2 inch pipe and automatic transmissions. Built to restore the original alignment, this kit helps your exhaust stay centered, reduce rattling, and prevent premature hanger wear.\u003c\/p\u003e \u003ch2\u003eWhy this exhaust hanger kit stands out\u003c\/h2\u003e\n\u003cp\u003eRather than relying on generic mounts, this kit is designed to match the factory geometry of the C3 Corvette’s exhaust system. That means a precise fit, straightforward installation, and dependable support for your exhaust components—so you can cruise with confidence and enjoy the authentic Corvette sound without unwanted movement or noise.\u003c\/p\u003e \u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDirect-fit for 1968–1972 C3 Corvettes\u003c\/strong\u003e with a 2 1\/2 inch exhaust pipe, ensuring correct spacing and clearance.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eRestores proper exhaust alignment\u003c\/strong\u003e to prevent sagging, misalignment, and excessive vibration.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSupports automatic-transmission models\u003c\/strong\u003e where mounting points and harness routing can be stressed by age and mileage.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDurable, dependable mounting\u003c\/strong\u003e that helps extend the life of your exhaust hangers and surrounding hardware.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eImproved driving experience\u003c\/strong\u003e with reduced exhaust rattle and a steadier undercarriage feel, especially on bumpy roads.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eIdeal use cases\u003c\/h3\u003e\n\u003cp\u003ePerfect for restoration projects, high-mileage classics returning to daily driver status, or any enthusiast replacing worn or cracked exhaust hangers. If your Corvette shows signs of exhaust misalignment, looseness, or rattling near the undercarriage, this kit offers a practical, factory-aligned solution tailored to your C3’s 2 1\/2 inch exhaust configuration.\u003c\/p\u003e \u003ch3\u003eFitment and scope\u003c\/h3\u003e\n\u003cp\u003eSpecifically designed for the C3 generation (model years 1968 through 1972) with a 2 1\/2 inch exhaust pipe and automatic transmission setups. It’s a direct-fit replacement intended to simplify installation and maintain the correct exhaust geometry you expect from a classic Corvette.\u003c\/p\u003e \u003ch3\u003ePractical installation insights\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003eInspect the mounting points on the chassis and exhaust hangers prior to replacement to ensure clean seating surfaces.\u003c\/li\u003e \u003cli\u003eSupport the exhaust assembly before removing old hangers to avoid unintended stress on hangers and pipes.\u003c\/li\u003e \u003cli\u003eAlign the new hangers with the factory mounting locations for optimal clearance and minimal movement.\u003c\/li\u003e \u003cli\u003eTorque fasteners to the manufacturer’s recommended specs and recheck alignment after a short test drive.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eCare and long-term maintenance\u003c\/h3\u003e\n\u003cp\u003ePeriodically inspect the hangers for cracks, worn rubber, or corrosion, especially after winter driving or road salt exposure. Replacing worn hangers in pairs, when possible, helps maintain balanced support and reduces the risk of uneven exhaust stress over time.\u003c\/p\u003e \u003cp\u003eRenew the authenticity and reliability of your Corvette’s exhaust system with this focused, purpose-built hanger kit. It’s the practical, no-nonsense choice for keep­ing your C3 1968–1972 Corvette running true to its original performance—2 1\/2 inch exhaust, automatic transmission, and all.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CA","offers":[{"title":"Default Title","offer_id":53189196153197,"sku":"A32188","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/2188-1.png?v=1781737349","url":"https:\/\/www.westcoastcorvette.com\/products\/c3-1968-1972-chevrolet-corvette-exhaust-hanger-kit-2-1-2-inch-pipe-automatic-tra-2188","provider":"WestCoastCorvette.com","version":"1.0","type":"link"}