{"title":"QA1 Performance Shocks and Coilovers","description":"\u003cp\u003eSince 1993, QA1 has been an industry leader in High Performance Suspension and Driveline for the automotive aftermarket and various other industries.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSpanning a wide range of solutions, from\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/qa1.net\/shocks-struts\"\u003eindividual shock absorbers\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eto\u003ca href=\"https:\/\/qa1.net\/suspension-kits-systems\/full-vehicle?_gl=1*o9vly2*_up*MQ..*_gs*MQ..\u0026amp;gclid=Cj0KCQiAp-zLBhDkARIsABcYc6sZRx6k_6ts74P3Oddrx2OIGQe5F90wf9KQpLtwcIWMFPcVFgkcgJEaAqgMEALw_wcB\u0026amp;gbraid=0AAAAADpNVTWza1XbcB-yFu-jbby6YojXf\"\u003e\u003cspan\u003e \u003c\/span\u003esuspension systems for entire vehicles\u003c\/a\u003e, QA1 is dedicated to designing and producing high-quality, cost-effective solutions across several markets.\u003c\/p\u003e","products":[{"product_id":"corvette-qa1-rear-pro-coilover-shock-absorber-mod-series-8in-x-550lb-in-aluminum-1997-2013","title":"Corvette QA1  Rear Pro-Coilover Shock Absorber - Mod Series - 8in x 550lb\/in - Aluminum 1997-2013","description":"\u003cp\u003eCorvette QA1  Rear Pro-Coilover Shock Absorber - Mod Series - 8in x 550lb\/in - Aluminum 1997-2013\u003c\/p\u003e\n\u003cp\u003eConvert your Corvette?s leaf spring suspension to QA1?s MOD Series coil-over shocks to maximize handling performance, suspension tunability and ride height adjustment for the perfect stance. These 4-way adjustable Corvette coil-overs are perfect for pushing your car to the limit at the track then setting the valving for comfortable street use. Designed to meet the demands of top-tier pro touring and track cars that require more aggressive force curves, MOD Series shocks utilize modular valve packs. This allows you to change valving without removing the shocks from the car or exposing the shock oil to contamination. Additionally, low-speed bleed adjustability helps you further refine weight transfer and low-speed valving characteristics in any conditions. The nitrogen-charged piggyback canister delivers optimal performance while fitting within the tight confines of stock Corvette suspension geometry. Does not require the use of a to link relocation kit. Adjust your car?s ride height to improve its handling, lower the center of gravity and corner balance your car for maximum performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s bolt-in coil-overs are easy to install with basic hand tools and use factory mounting locations. They are available with multiple spring rate options to help you find the perfect rate for your intended use. The medium springs offer great street-ability for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , Installation notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require the use of a toe link relocation kit.\u003c\/p\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":51787364237677,"sku":"QAPRCK52474","price":2213.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/fc208797c205b6a47b7c5d286d84418eL.png?v=1765957290"},{"product_id":"corvette-qa1-front-pro-coilover-shock-absorber-8in-x-700lb-in-aluminum-mod-series-1997-2013","title":"Corvette QA1 Front Pro-Coilover Shock Absorber - 8in x 700lb\/in - Aluminum Mod Series 1997-2013","description":"\u003cp\u003eCorvette QA1 Front Pro-Coilover Shock Absorber - 8in x 700lb\/in - Aluminum Mod Series 1997-2013\u003c\/p\u003e\n\u003cp\u003eConvert your Corvette?s leaf spring suspension to QA1?s MOD Series coil-over shocks to maximize handling performance, suspension tunability and ride height adjustment for the perfect stance. These 4-way adjustable Corvette coil-overs are perfect for pushing your car to the limit at the track then setting the valving for comfortable street use. Designed to meet the demands of top-tier pro touring and track cars that require more aggressive force curves, MOD Series shocks utilize modular valve packs. This allows you to change valving without removing the shocks from the car or exposing the shock oil to contamination. Additionally, low-speed bleed adjustability helps you further refine weight transfer and low-speed valving characteristics in any conditions. The nitrogen-charged piggyback canister delivers optimal performance while fitting within the tight confines of stock Corvette suspension geometry. Does not require the use of a to link relocation kit. Adjust your car?s ride height to improve its handling, lower the center of gravity and corner balance your car for maximum performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s bolt-in coil-overs are easy to install with basic hand tools and use factory mounting locations. They are available with multiple spring rate options to help you find the perfect rate for your intended use. The medium springs offer great street-ability for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , Installation notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require the use of a toe link relocation kit.\u003c\/p\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":51787364335981,"sku":"QAPMG455-08700","price":2362.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/7a5845fd97306ab3265f61556c243cd1L.png?v=1765957293"},{"product_id":"qa1-front-mod-series-pro-coil-shock-for-97-13-chevrolet-corvette-adjustable-coil-over-suspension-enhancement","title":"QA1 Front MOD Series Pro Coil Shock for 97-13 Chevrolet Corvette – Adjustable Coil-Over Suspension Enhancement","description":"\u003cp\u003eFront MOD Series Pro Coil for 97-13 Corvette\n\u003cbr\u003eConvert your Corvette?s leaf spring suspension to QA1?s MOD Series coil-over shocks to maximize handling performance, suspension tunability and ride height adjustment for the perfect stance. These 4-way adjustable Corvette coil-overs are perfect for pushing your car to the limit at the track then setting the valving for comfortable street use. Designed to meet the demands of top-tier pro touring and track cars that require more aggressive force curves, MOD Series shocks utilize modular valve packs. This allows you to change valving without removing the shocks from the car or exposing the shock oil to contamination. Additionally, low-speed bleed adjustability helps you further refine weight transfer and low-speed valving characteristics in any conditions. The nitrogen-charged piggyback canister delivers optimal performance while fitting within the tight confines of stock Corvette suspension geometry. Does not require the use of a to link relocation kit. Adjust your car?s ride height to improve its handling, lower the center of gravity and corner balance your car for maximum performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s bolt-in coil-overs are easy to install with basic hand tools and use factory mounting locations. They are available with multiple spring rate options to help you find the perfect rate for your intended use. The medium springs offer great street-ability for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , Installation notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require the use of a toe link relocation kit.\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eValve packs shock can quickly and easily be revalved without interrupting the oil path or opening the shock up for debris and air contamination\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eQuickTune Technology: dry modular valve packs that can easily be swapped out\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eRemote or piggyback canister mounting options\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003e4-way adjustable high and low speed bleed\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003e100% dyno tested and serialized\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette with the QA1 MOD Series Pro Coil Shock, designed specifically for models from 1997 to 2013. These high-performance coil-overs replace the stock leaf spring suspension, offering a significant boost in handling, ride height adjustability, and suspension tunability. Built to meet the demands of both street enthusiasts and track-day racers, the QA1 MOD Series shocks feature modular valve packs that enable quick and easy revalving without removing the shocks or risking contamination, thanks to their innovative QuickTune Technology. This design allows you to adapt your suspension for different driving conditions, whether you’re pushing your car to the limit on the track or enjoying a comfortable cruise.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eModular valve packs allow quick and easy revalving without removing the shocks or risking contamination\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eQuickTune Technology enables dry modular valve pack swapping for flexible tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple mounting options including remote or piggyback canisters\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFour-way damping adjustment with high and low-speed bleed controls\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e100% dyno tested and serialized for quality and reliability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned and made in the USA for superior craftsmanship\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593369965,"sku":"qapMG455-08550","price":2362.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/7a5845fd97306ab3265f61556c243cd1L_1017adfc-48f3-4d11-8d36-64f1431e954f.png?v=1769722992"},{"product_id":"qa1-rck52475-pro-coil-series-rear-shock-for-97-13-chevrolet-corvette-with-adjustable-damping","title":"QA1 RCK52475 Pro Coil Series Rear Shock for 97-13 Chevrolet Corvette with Adjustable Damping","description":"\u003cp\u003eRera MOD Series Pro Coil for 97-13 Corvette with Firm Spring rate\n\u003cbr\u003eConvert your Corvette?s leaf spring suspension to QA1?s MOD Series coil-over shocks to maximize handling performance, suspension tunability and ride height adjustment for the perfect stance. These 4-way adjustable Corvette coil-overs are perfect for pushing your car to the limit at the track then setting the valving for comfortable street use. Designed to meet the demands of top-tier pro touring and track cars that require more aggressive force curves, MOD Series shocks utilize modular valve packs. This allows you to change valving without removing the shocks from the car or exposing the shock oil to contamination. Additionally, low-speed bleed adjustability helps you further refine weight transfer and low-speed valving characteristics in any conditions. The nitrogen-charged piggyback canister delivers optimal performance while fitting within the tight confines of stock Corvette suspension geometry. Does not require the use of a to link relocation kit. Adjust your car?s ride height to improve its handling, lower the center of gravity and corner balance your car for maximum performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s bolt-in coil-overs are easy to install with basic hand tools and use factory mounting locations. They are available with multiple spring rate options to help you find the perfect rate for your intended use. The medium springs offer great street-ability for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , Installation notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require the use of a toe link relocation kit.\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eUltimate balance of ride quality and performance handling with adjustable rebound and compression valving.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eAchieve 1\/2 higher than stock down to 2.25\" lower than stock.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLimited Lifetime Warranty for peace of mind.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eProudly made in the USA.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette's suspension with the QA1 RCK52475 Pro Coil Series Rear Shock, designed specifically for models from 97 to 13. These coil-over shocks provide a direct replacement for the stock leaf spring setup, offering significant improvements in handling, ride quality, and suspension tunability. Featuring a 4-way adjustable damping system, these shocks allow you to fine-tune rebound and compression forces to match your driving style and conditions, whether on the track or on the street. The nitrogen-charged piggyback canister ensures consistent performance and fits within the stock suspension geometry without requiring additional modifications such as a toe link relocation kit. \u003cbr\u003e The modular valve packs enable quick valving changes without removing the shocks, maintaining oil integrity and simplifying adjustments. Low-speed bleed adjustments help refine weight transfer and handling characteristics, giving you greater control over your vehicle’s performance. These shocks are available with multiple spring rate options, including medium springs for street use and firm springs suited for aggressive track driving, reducing body roll and increasing stability during hard cornering. \u003cbr\u003e Installation is straightforward, utilizing factory mounting points and basic hand tools, making it accessible for most enthusiasts. The ride height adjustment feature allows lowering the vehicle by up to 2 inches, lowering the center of gravity for improved handling and cornering. Whether you aim for a more aggressive stance or a balanced street setup, these coil-overs help you achieve your desired look and performance. Built in the USA with a limited lifetime warranty, the QA1 Pro Coil Series shocks are designed to meet the demands of high-performance driving while maintaining everyday usability. Sold as a pair, these shocks are compatible with various Corvette models including Z06s, ensuring a versatile upgrade for your vehicle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e4-way adjustable damping for personalized ride and handling tuning\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eModular valve packs for quick valving changes without shock removal\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLow-speed bleed adjustments for refined weight transfer control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eNitrogen-charged piggyback canister for consistent performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFactory mounting compatibility for easy bolt-in installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAdjustable ride height for lowering by up to 2 inches\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMultiple spring rate options for street or track use\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to meet the demands of pro touring and track cars\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMade in the USA with a limited lifetime warranty\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593402733,"sku":"qapRCK52475","price":2213.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/fc208797c205b6a47b7c5d286d84418eL_95284f57-d4df-4120-93c9-bb4f25e81dbe.png?v=1769722999"},{"product_id":"qa1-97-13-chevy-corvette-rear-pro-coilover-shock-absorber-double-adjustable-8-inch-length-550-lb-in-spring-rate","title":"QA1 97-13 Chevy Corvette Rear Pro-Coilover Shock Absorber - Double Adjustable - 8 Inch Length - 550 lb\/in Spring Rate","description":"\u003cp\u003eRear Proma Star Pro Coil double adjustable for 97-13 Corvette  with Firm Spring rate\n\u003cbr\u003eConvert your Corvette?s leaf spring suspension to QA1?s Proma Star coil-over shocks to improve handling, suspension tunability and ride quality while gaining the ability to quickly and easily adjust ride height for a perfect stance. These Corvette coil-overs offer the perfect balance of street-ability and performance if you plan to use your car on the road and occasionally take it to the track. Dial in your car?s ride quality and handling characteristics with adjustable valving, offering the ability to independently tune compression and rebound valving. Adjust your car?s ride height to improve its handling by lowering the center of gravity and gaining a greater ability to corner balance your car, maximizing performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s coil-overs are easy to install with basic hand tools and use factory mounting locations. They do not require the use of a toe link relocation kit. , , They are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , These QA1 shocks are made in the USA, serialized, dyno tested and eligible for a limited lifetime warranty. Register your coil-overs before installation by visiting qa1.net\/warranty to enter contact information and serial numbers. Installation Notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require a toe link relocation kit.\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eUltimate balance of ride quality and performance handling with adjustable rebound and compression valving.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eAchieve 1\/2 higher than stock down to 2.25\" lower than stock.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLimited Lifetime Warranty for peace of mind.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eProudly made in the USA.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette with the QA1 RCK52471 rear Pro-Coilover shocks, engineered to enhance handling, ride quality, and suspension tunability. Designed specifically for 97-13 models, these double adjustable coil-overs allow you to fine-tune compression and rebound damping independently, giving you precise control over your vehicle's performance characteristics. Whether you're seeking a comfortable street ride or aggressive track performance, these coil-overs offer an optimal balance for both applications. They enable you to easily adjust ride height, lowering your Corvette by up to 2 inches for improved cornering and a more aggressive stance, or raise it for everyday comfort. Installation is straightforward with factory mounting points, requiring only basic hand tools, and no toe link relocation is necessary. These shocks are available with multiple spring rates; the 550 lb\/in spring is ideal for spirited street driving and occasional track use, providing reduced body roll and enhanced handling. Built in the USA, each shock is serialized and dyno tested for quality assurance, and they are covered by a limited lifetime warranty. For electronic ride control models, Real Time Damping simulators are required for full functionality. Register your coil-overs after installation at qa1.net\/warranty to activate warranty coverage. Whether upgrading for improved performance or customized handling, these coil-overs deliver durable, reliable suspension tuning for your Corvette.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAdjustable rebound and compression valving for precise tuning of ride quality and handling.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLower the vehicle between 0.5 inch and 2 inches to optimize cornering and stance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMade in the USA with serialized, dyno-tested quality assurance.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEasy installation using factory mounting locations without the need for toe link relocation.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAvailable with multiple spring rate options, including 550 lb\/in for performance-oriented driving.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuitable for street use and occasional track days, providing a balanced driving experience.\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLimited lifetime warranty for peace of mind and durability.\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593435501,"sku":"qapRCK52471","price":1182.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/b0230648f96a03e494e4e35aa7f19646L.png?v=1769723004"},{"product_id":"qa1-97-13-chevy-corvette-rear-pro-coilover-shock-absorber-double-adjustable-8-inch-450-lb-in-spring-rate","title":"QA1 97-13 Chevy Corvette Rear Pro-Coilover Shock Absorber - Double Adjustable, 8 Inch, 450 lb\/in Spring Rate","description":"\u003cp\u003eRear Proma Star Pro Coil double adjustable for 97-13 Corvette with Medium Spring rate\n\u003cbr\u003eConvert your Corvette?s leaf spring suspension to QA1?s Proma Star coil-over shocks to improve handling, suspension tunability and ride quality while gaining the ability to quickly and easily adjust ride height for a perfect stance. These Corvette coil-overs offer the perfect balance of street-ability and performance if you plan to use your car on the road and occasionally take it to the track. Dial in your car?s ride quality and handling characteristics with adjustable valving, offering the ability to independently tune compression and rebound valving. Adjust your car?s ride height to improve its handling by lowering the center of gravity and gaining a greater ability to corner balance your car, maximizing performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s coil-overs are easy to install with basic hand tools and use factory mounting locations. They do not require the use of a toe link relocation kit. , , They are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , These QA1 shocks are made in the USA, serialized, dyno tested and eligible for a limited lifetime warranty. Register your coil-overs before installation by visiting qa1.net\/warranty to enter contact information and serial numbers. Installation Notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require a toe link relocation kit.\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eUltimate balance of ride quality and performance handling with adjustable rebound and compression valving.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eAchieve 1\/2 higher than stock down to 2.25\" lower than stock.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLimited Lifetime Warranty for peace of mind.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eProudly made in the USA.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eSold as a pair.\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette with the QA1 RCK52470 rear Pro-Coilover shocks, designed specifically for models from 2001 to 2013. These coil-over shocks offer a versatile solution to enhance handling, ride quality, and suspension tuning, whether on the street or track. Featuring a double adjustable valving system, you can independently fine-tune compression and rebound to achieve the ideal balance for your driving style. This flexibility allows for precise ride height adjustments, lowering your vehicle by up to 2 inches for improved cornering and a lower center of gravity, or maintaining a more stock-like stance with minimal drop. The shocks are engineered to fit factory mounting locations without requiring additional toe link modifications, simplifying installation with basic hand tools.\u003cbr\u003eConstructed with high-quality components, these QA1 shocks are made in the USA, serialized, and dyno tested to ensure durability and performance. They are available with multiple spring rate options; the medium spring rate (450 lb\/in) is ideal for daily street use, providing a comfortable yet controlled ride. For those seeking track-oriented performance, firmer springs are available to reduce body roll and increase grip during aggressive cornering. The shocks are designed to withstand the demands of high-performance driving, offering a balanced compromise between street comfort and track capability. QA1's coil-overs are backed by a limited lifetime warranty, providing peace of mind for your investment.\u003cbr\u003eInstallation is straightforward, and these shocks are compatible with models equipped with electronic ride control systems when used with Real Time Damping simulators. Register your coil-overs on QA1’s website to activate warranty coverage. These shocks are a perfect upgrade for Corvette enthusiasts seeking improved handling, adjustable ride height, and enhanced suspension performance without sacrificing everyday comfort.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDouble adjustable valving for independent tuning of compression and rebound\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAchieve a ride height adjustment range from 0.5 inch to 2 inches lower than stock\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIdeal for street and occasional track use with balanced handling and ride quality\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed in the USA with serialized, dyno-tested components\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEasy installation using factory mounting points without toe link relocation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAvailable with multiple spring rate options for customized performance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eLimited lifetime warranty for peace of mind\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with models from 2001 to 2013 Chevrolet Corvette\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593533805,"sku":"qapRCK52470","price":1182.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/b0230648f96a03e494e4e35aa7f19646L_7fdc7b4d-1207-4492-a994-ac924e23735c.png?v=1769723010"},{"product_id":"qa1-97-13-chevy-corvette-front-pro-coilover-shock-absorber-double-adjustable-8-inch-550-lb-in-spring-aluminum","title":"QA1 97-13 Chevy Corvette Front Pro-Coilover Shock Absorber - Double Adjustable, 8 Inch, 550 lb\/in Spring, Aluminum","description":"\u003cp\u003eFront Proma Star Pro Coil double adjustable for 97-13 Corvette\n\u003cbr\u003eConvert your Corvette?s leaf spring suspension to QA1?s Proma Star coil-over shocks to improve handling, suspension tunability and ride quality while gaining the ability to quickly and easily adjust ride height for a perfect stance. These Corvette coil-overs offer the perfect balance of street-ability and performance if you plan to use your car on the road and occasionally take it to the track. Dial in your car?s ride quality and handling characteristics with adjustable valving, offering the ability to independently tune compression and rebound valving. Adjust your car?s ride height to improve its handling by lowering the center of gravity and gaining a greater ability to corner balance your car, maximizing performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s coil-overs are easy to install with basic hand tools and use factory mounting locations. They do not require the use of a toe link relocation kit. , , They are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , These QA1 shocks are made in the USA, serialized, dyno tested and eligible for a limited lifetime warranty. Register your coil-overs before installation by visiting qa1.net\/warranty to enter contact information and serial numbers. Installation Notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require a toe link relocation kit.\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eAchieve the ultimate balance of ride quality and performance handling with independent tuning of rebound and compression valving.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eEasy bolt-in installation that works with your factory or upgraded QA1 tubular control arms.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eUp to 2 of ride height adjustment allows you to dial in the perfect stance.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLimited Lifetime Warranty for peace of mind.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette with the QA1 97-13 Corvette Front Pro-Coilover Shock Absorber, a high-performance suspension component designed to enhance handling, ride quality, and suspension tunability. Crafted specifically for models from 2001 to 2013, this coil-over features a double adjustable design, allowing independent tuning of compression and rebound damping to fine-tune your vehicle's response under various driving conditions. Whether you're on the street or hitting the track, this coil-over provides the flexibility to optimize your Corvette's performance and comfort. The 8-inch spring with a 550 lb\/in rate offers a balanced setup suitable for most street-driven cars, with options available for firmer or softer springs based on your preferences and usage. Installing these coil-overs is straightforward, as they bolt directly into factory mounting locations without the need for toe link relocation, making it accessible for enthusiasts with basic hand tools. The ride height adjustment feature allows you to lower your vehicle by up to 2 inches, improving cornering stability by lowering the center of gravity and enabling precise stance customization. This adjustment capability is especially beneficial for optimizing handling dynamics and achieving the desired aesthetic. Built in the USA, these QA1 shocks are serialized, dyno tested, and come with a limited lifetime warranty, ensuring quality and durability. For models equipped with electronic ride control, additional Real Time Damping simulators are required for proper operation. These coil-overs are available with multiple spring rate options, catering to both street and track enthusiasts seeking ultimate performance and handling. Easy to install and compatible with factory or upgraded control arms, the QA1 Pro-Coilover shocks are an excellent upgrade for Corvette owners looking to improve their vehicle’s suspension performance with adjustable features for a customized driving experience.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIndependent tuning of rebound and compression valving for optimal handling balance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-in installation compatible with factory or upgraded control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUp to 2 inches of ride height adjustment for personalized stance and handling\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMade in the USA with serialized, dyno-tested quality assurance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuitable for street use and track performance with adjustable spring rates\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593763181,"sku":"qapGD455-08550","price":1182.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/c94c5c5f67daaa957f19f8279a69677dL.png?v=1769723016"},{"product_id":"qa1-97-13-chevy-corvette-front-pro-coilover-shock-absorber-double-adjustable-8-inch-x-450-lb-in-aluminum","title":"QA1 97-13 Chevy Corvette Front Pro Coilover Shock Absorber - Double Adjustable - 8 Inch x 450 lb\/in - Aluminum","description":"\u003cp\u003eConvert your Corvette?s leaf spring suspension to QA1?s Proma Star coil-over shocks to improve handling, suspension tunability and ride quality while gaining the ability to quickly and easily adjust ride height for a perfect stance. These Corvette coil-overs offer the perfect balance of street-ability and performance if you plan to use your car on the road and occasionally take it to the track. Dial in your car?s ride quality and handling characteristics with adjustable valving, offering the ability to independently tune compression and rebound valving. Adjust your car?s ride height to improve its handling by lowering the center of gravity and gaining a greater ability to corner balance your car, maximizing performance. You can lower both base model cars (1\" to 2\" of drop) and Z06 models (.5\" to 1.5\" of drop). QA1?s coil-overs are easy to install with basic hand tools and use factory mounting locations. They do not require the use of a toe link relocation kit. , , They are available with multiple spring rate options to help you find the perfect option for your intended use. The medium springs are great for cars that will mostly be used on the road. The firm option is geared toward track-oriented cars, further reducing body roll under hard cornering and providing a more planted feel. , , These QA1 shocks are made in the USA, serialized, dyno tested and eligible for a limited lifetime warranty. Register your coil-overs before installation by visiting qa1.net\/warranty to enter contact information and serial numbers. Installation Notes: , , Models with electronic ride control require Real Time Damping simulators. , , Does not require a toe link relocation kit.\n\u003cbr\u003eFront Proma Star Pro Coil double adjustable for 97-13 Corvette\n\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cbr\u003e  \u003cli\u003eAchieve the ultimate balance of ride quality and performance handling with independent tuning of rebound and compression valving.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eEasy bolt-in installation that works with your factory or upgraded QA1 tubular control arms.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eUp to 2 of ride height adjustment allows you to dial in the perfect stance.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eLimited Lifetime Warranty for peace of mind.\u003c\/li\u003e\n\u003cbr\u003e  \u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003cbr\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cp\u003eUpgrade your Chevrolet Corvette's suspension with the QA1 GD455-08450 Pro Series coilover shocks, designed specifically for models from 2001 to 2013. These high-performance coilovers transform your vehicle’s handling and ride quality by replacing the stock leaf spring suspension with adjustable coil-over shocks, allowing for precise tuning and an improved driving experience. Crafted with aluminum components for enhanced durability and reduced weight, these shocks provide a perfect balance between street comfort and track-ready performance. They feature independent rebound and compression valving, enabling you to fine-tune your car’s handling characteristics to match your driving style and conditions. Whether you're looking to improve cornering grip or achieve a more aggressive stance, these coilovers offer up to 2 inches of ride height adjustment, making it easy to lower your Corvette for a more aggressive look and better handling dynamics. The installation process is straightforward, utilizing factory mounting points without the need for additional toe link relocation kits, and they are compatible with factory or upgraded QA1 tubular control arms. Built in the USA, these shocks are dyno tested, serialized, and backed by a limited lifetime warranty for peace of mind. They are suitable for a variety of driving scenarios, with spring rates available for street use or more aggressive track applications, providing versatility and performance for your Corvette. Please note that models equipped with electronic ride control require Real Time Damping simulators for optimal functioning. Enjoy improved handling, reduced body roll, and a customizable stance with the QA1 Pro Coilover shocks, making your Corvette more responsive and enjoyable to drive. Appropriate for street and occasional track use, these coilovers are an excellent upgrade for enthusiasts seeking performance and reliability in one package.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eIndependent rebound and compression valving for precise tuning of handling characteristics\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-in installation compatible with factory or upgraded control arms\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eUp to 2 inches of ride height adjustment to achieve the perfect stance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eMade in the USA with high-quality aluminum components for durability and weight savings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuitable for a wide range of Corvette models from 2001 to 2013, including Z06 variants\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAvailable with multiple spring rates to match your driving needs, from street to track\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDyno tested, serialized, and covered by a limited lifetime warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEasy to install without requiring toe link relocation kits\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDesigned to improve cornering, reduce body roll, and enhance overall handling\u003c\/li\u003e\u003c\/ul\u003e","brand":"QA1","offers":[{"title":"Default Title","offer_id":52983593795949,"sku":"qapGD455-08450","price":1182.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/c94c5c5f67daaa957f19f8279a69677dL_ebf18211-3f48-4456-a9a7-aa17977e201e.png?v=1769723022"}],"url":"https:\/\/www.westcoastcorvette.com\/collections\/qa1-performance-shocks-and-coilovers.oembed","provider":"WestCoastCorvette.com","version":"1.0","type":"link"}