{"title":"MaxRamps for Corvettes","description":"\u003cp\u003eLow cars need the right ramps. MaxRamps builds lightweight, low angle ramps and cradles designed for cars like the Corvette, so you can get under the car, load it on a trailer, or store it for the winter without scraping a splitter or bumper.\u003c\/p\u003e\u003cp\u003eDrive up service ramps lift your Corvette for oil changes and maintenance. Wheel cradles hold the tires during storage and help prevent flat spots. Trailer ramps make loading show and track cars easier, and jack ramps give your floor jack room to slide under the lowest cars.\u003c\/p\u003e\u003cp\u003eNot sure which height you need? Call us at 714-630-6396 and we'll help you pick the right setup for your Corvette.\u003c\/p\u003e","products":[{"product_id":"drive-up-ramp-2-5-high-scale-ramp-set-of-2-maxramps","title":"Drive-Up Ramp | 2.5\" High | Scale Ramp with Platform | Set of 2 | MaxRamps","description":"\u003cp\u003eOur drive-up scale ramps with a platform are for use with scales that are 2.5-inches high. Providing the low-angle incline for a vehicle's tires to gently drive-up onto four scales, these ramps are convenient for scaling in the shop or at the track.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_scale_ramps.pdf?v=1787011724\" target=\"_blank\" title=\"Manual Scale Platform Service Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310691181,"sku":"MR-MRSCALE-P","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRSCALE-P_1.jpg?v=1787146002"},{"product_id":"drive-up-ramp-3-high-jack-ramp-1-piece-design-maxramps","title":"Drive-Up Ramp | 3\" High Jack Ramp | 1-Piece Design | MaxRamps","description":"\u003cp\u003eLow clearance vehicles, at times, have difficultly getting a standard hydraulic jack underneath. Enter our 3-inch High Jack Ramps which provide a low 7.8-degree incline for your vehicle to get enough height and clearance for a hydraulic jack.B \u003c\/p\u003e\n\u003cp\u003eThe 3-inch High Jack Ramps are handy for keeping in your car. The set takes up very little room in your trunk or trailer and weighs just 2 lbs. per ramp. Each set of Jack Ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_service_ramps.pdf?v=1785803423\" title=\"Manual Jack Ramp Service Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310723949,"sku":"MR-MRJR","price":123.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRJR_1.png?v=1787350617"},{"product_id":"wheel-cradle-12-high-2-piece-split-design-maxramps","title":"Wheel Cradle | 12\" High | 2-Piece Split Design | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur line of Wheel Cradles offers several height and width options across both a 1-piece and 2-piece split design. We offer the most variations so that you can choose the best set-up for your vehicle. With one set of Wheel Cradles, you have the option to lift the front or rear of your vehicle. With two sets of our Wheel Cradles, you can have an even lift on all four of your vehicle's tires. Our sturdy Wheel Cradle is designed to fit tire diameters between 24 to 30 inches.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWe recommend a 2-piece Wheel Cradle design for vehicles with a stiff suspension. The 2-piece design allows for a half height lift en route to a full height lift. This set of Wheel Cradles is a 2-piece design, provides 12\" of total lift (6\" high per piece) and accommodates tires up to 12\" wide. Easy to store and transport, each wheel cradle is made with a convenient carrying strap and weighs just 6 lbs. per cradle. Each set of wheel cradles supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNOTE: Wheel Cradles require the use of a hydraulic jack (sold separately by other manufacturers). When selecting a hydraulic jack, ensure that the total lift provided by the hydraulic jack is high enough to position your vehicle's tires on our Wheel Cradles.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_2-piece_wheel_cradles.pdf?v=1785641611\" title=\"Manual Two-Piece Wheel Cradle\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310756717,"sku":"MR-MRCR-12-SP","price":251.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRCR-12-SP_3.jpg?v=1787146009"},{"product_id":"wheel-cradle-12-high-1-piece-design-maxramps","title":"Wheel Cradle | 12\" High | 1-Piece Design | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur line of Wheel Cradles offers several height and width options across both a 1-piece and 2-piece split design. We offer the most variations so that you can choose the best set-up for your vehicle. With one set of Wheel Cradles, you have the option to lift the front or rear of your vehicle. With two sets of our Wheel Cradles, you can have an even lift on all four of your vehicle's tires. Our sturdy Wheel Cradle is designed to fit tire diameters between 24 to 30 inches.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis set of Wheel Cradles is a 1-piece design, provides 12\" of lift, and accommodates tires up to 12\" wide. Easy to store and transport, each wheel cradle is made with a convenient carrying strap and weighs just 6 lbs. per cradle. Each set of wheel cradles supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNOTE: Wheel Cradles require the use of a hydraulic jack (sold separately by other manufacturers). When selecting a hydraulic jack, ensure that the total lift provided by the hydraulic jack is high enough to position your vehicle's tires on our Wheel Cradles.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_wheel_cradles.pdf?v=1785641611\" title=\"Manual One-Piece Wheel Cradle\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310789485,"sku":"MR-MRCR-12","price":223.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRCR-12_4.jpg?v=1787146012"},{"product_id":"wheel-cradle-10-high-1-peice-design-maxramps","title":"Wheel Cradle | 10\" High | 1-Piece Design | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur line of Wheel Cradles offers several height and width options across both a 1-piece and 2-piece split design. We offer the most variations so that you can choose the best set-up for your vehicle. With one set of Wheel Cradles, you have the option to lift the front or rear of your vehicle. With two sets of our Wheel Cradles, you can have an even lift on all four of your vehicle's tires. Our sturdy Wheel Cradle is designed to fit tire diameters between 24 to 30 inches.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis set of Wheel Cradles is a 1-piece design, provides 10\" of lift, and accommodates tires up to 12\" wide. Easy to store and transport, each wheel cradle is made with a convenient carrying strap and weighs just 4 lbs. per cradle. Each set of wheel cradles supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNOTE: Wheel Cradles require the use of a hydraulic jack (sold separately by other manufacturers). When selecting a hydraulic jack, ensure that the total lift provided by the hydraulic jack is high enough to position your vehicle's tires on our Wheel Cradles.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_wheel_cradles.pdf?v=1785641611\" title=\"Manual One-Piece Wheel Cradle\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310822253,"sku":"MR-MRCR-10","price":204.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRCR-10_1.jpg?v=1787146014"},{"product_id":"wheel-cradles-8-high-1-peice-design-maxramps","title":"Wheel Cradles | 8\" High | 1-Piece Design | MaxRamps","description":"\u003cp\u003eOur line of Wheel Cradles offers several height and width options across both a 1-piece and 2-piece split design. We offer the most variations so that you can choose the best set-up for your vehicle. With one set of Wheel Cradles, you have the option to lift the front or rear of your vehicle. With two sets of our Wheel Cradles, you can have an even lift on all four of your vehicle's tires. Our sturdy Wheel Cradle is designed to fit tire diameters between 24 to 30 inches.B\u003c\/p\u003e\n\u003cp\u003eThis set of Wheel Cradles is a 1-piece design, provides 8\" of lift, and accommodates tires up to 12\" wide. Easy to store and transport, each wheel cradle is made with a convenient carrying strap and weighs just 4 lbs. per cradle. Each set of wheel cradles supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eNOTE: Wheel Cradles require the use of a hydraulic jack (sold separately by other manufacturers). When selecting a hydraulic jack, ensure that the total lift provided by the hydraulic jack is high enough to position your vehicle's tires on our Wheel Cradles.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_wheel_cradles.pdf?v=1785641611\" title=\"Manual One-Piece Wheel Cradle\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003ctable class=\"attributes-table table-collapse\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eOrigin\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eProduct Dimensions\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e15\" L x 12\" W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eLift Height\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eApproach Angle\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003eNot applicable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eLoad Capacity\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e1,750 lbs. per wheel cradle; 3,500 lbs. per set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eMaximum Tire Width\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e12\" wide and a tire diameter between 24\"-30\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eItem Weight\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e4 lbs. per wheel cradle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eWhat's Included\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003e2 wheel cradles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"shopify-block product-custom-attribute-block attribute-row\"\u003e\n\u003ctd class=\"attribute-name\"\u003eComposition\u003c\/td\u003e\n\u003ctd class=\"attribute-value\"\u003eSolid core high density EPS with polyurea coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310855021,"sku":"MR-MRCR-8","price":185.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRCR-8_1.png?v=1788894652"},{"product_id":"trailer-ramp-11-ramp-2-piece-spli-design-maxramps","title":"Trailer Ramp | 11\" Ramp | 2-Piece Split Design | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are the choice for the lowest clearance vehicles at 11\" high with a 4.3-degree angle, and just 32 lbs. per ramp (assembled). The 2-piece split design is for ease of storage and transporting. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_MRTX-11-SP_trailer_ramps.pdf?v=1785641611\" title='Manual Two-Piece MRTX-11-SP 11\" Trailer Ramp' rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310887789,"sku":"MR-MRTX-11-SP","price":926.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-11-SP_5.png?v=1787350293"},{"product_id":"trailer-ramp-9-high-flap-compatible-2-piece-design-maxramps","title":"Trailer Ramp | 9\" High | Flap Compatible | 2-Piece Design | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are compatible with trailer door flaps as there is a groove cut-out for the flap to be unfolded. The ramps are 8\" high with a 5.5-degree angle and is just 23 lbs. per ramp. The 2-piece split design also allows for easier storage and transporting. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_Flap_compatible_trailer_ramps.pdf?v=1785641611\" target=\"_blank\" title=\"Manual Flap Compatible Trailer Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310920557,"sku":"MR-MRTX-9FP-SP","price":726.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-9FP-SP_1.png?v=1789053339"},{"product_id":"trailer-ramp-extra-long-8-high-maxramps","title":"Trailer Ramp Extra Long | 8\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are 8\" high with a 6.3-degree angle and is just 16 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.B \u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310953325,"sku":"MR-MRTX-8L","price":565.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-8L_1.png?v=1787277453"},{"product_id":"trailer-ramp-8-high-maxramps","title":"Trailer Ramp | 8\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are 8\" high with an 8.7-degree angle and is just 12 lbs. per ramp. The ramps accommodate tires up to 14-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766310986093,"sku":"MR-MRTX-8","price":451.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-8_1.png?v=1787277029"},{"product_id":"trailer-ramp-7-high-tilt-maxramps","title":"Trailer Ramp | 7\" High | Tilt | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps have a 1\" shallow notch depth specifically for tilt style trailers. The ramps are 7\" high with a 5.5-degree angle and is just 14 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" target=\"_blank\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311018861,"sku":"MR-MRTX-7T","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-7T_1.png?v=1787276716"},{"product_id":"trailer-ramp-7-high-flal-compatible-maxramps","title":"Trailer Ramp | 7\" High | Flap Compatible | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are compatible with trailer door flaps as there is a groove cut-out for the flap to be unfolded. The ramps are 6.25\" high with a 5.5-degree angle and is just 14 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_Flap_compatible_trailer_ramps.pdf?v=1785641611\" target=\"_blank\" title=\"Manual Flap Compatible Trailer Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311051629,"sku":"MR-MRTX-7FP","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-7FP_1_781793af-6e4e-42b5-b4a8-11c34cd94df4.png?v=1787276463"},{"product_id":"trailer-ramp-7-high-maxramps","title":"Trailer Ramp | 7\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are 7\" high with a 5.5-degree angle and is just 14 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" target=\"_blank\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311084397,"sku":"MR-MRTX-7","price":513.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-7_1.png?v=1787276023"},{"product_id":"trailer-ramps-6-high-maxramps","title":"Trailer Ramps | 6\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are 6\" high with an 8.2-degree angle and is just 6 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311117165,"sku":"MR-MRTX-6","price":356.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-6_1.png?v=1787275723"},{"product_id":"trailer-ramps-5-high-maxramps","title":"Trailer Ramps | 5\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese Trailer Ramps are 5\" high with a 4.3-degree angle and is just 10 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311149933,"sku":"MR-MRTX-5","price":408.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-5_1.png?v=1787275102"},{"product_id":"trailer-ramps-4-high-maxramps","title":"Trailer Ramps | 4\" High | MaxRamps","description":"\u003cp\u003eOur Trailer Ramps provide the low-angle inclines that are needed when loading and unloading classic cars, show cars, race cars, and exotics cars. Our Trailer Ramps provide the right incline for low clearance vehicles and prevents high-centering at the hinge point of the trailer door. Taking two variables into consideration - your trailer and car, we have several models of Trailer Ramps that complete the path for a smooth loading without the need to remove bumpers.\u003c\/p\u003e\n\u003cp\u003eThese Trailer Ramps are 4\" high with a 5-degree angle and is just 6 lbs. per ramp. The ramps accommodate tires up to 12-inches wide. Each set of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. The Trailer Ramps are easy to store and transport.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_trailer_ramps.pdf?v=1785641610\" title=\"Manual One-Piece Trailer Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311182701,"sku":"MR-MRTX-4","price":344.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MRTX-4_1.png?v=1787274760"},{"product_id":"drive-up-service-ramp-80-2-peice-split-design-10-high-maxramps","title":"Drive-Up Service Ramp 80\" | 2-Piece Split Design | 10\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 80\" long drive-up service ramps provide a 10-inch lift for low-clearance vehicles. Designed with an 8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars that have splitters and lowered suspension. These ramps feature a mild cradle design on the ramp's platform andB  are used for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 2-piece split design provides ultimate convenience for accessing the vehicle from the side. When a vehicle is secured on the ramp, the incline piece may be removed. The 2-piece design is also convenient for storage and transporting.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 14-inches wide, the maximum recommended tire width to use on these ramps is 12-inches. Weighing just 18 lbs. per ramp (assembled), each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_2-piece_service_ramps.pdf?v=1785641611\" title=\"Manual Two-Piece Service Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311215469,"sku":"MR-MR80-10-SP","price":631.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR80-10-SP_1.jpg?v=1787146045"},{"product_id":"drive-up-service-ramp-72-2-peice-split-design-8-high-maxramps","title":"Drive-Up Service Ramp 72\" | 2-Piece Split Design | 8\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 72\" long drive-up service ramps provide an 8-inch lift for ultra low-clearance vehicles. Designed with a 6.8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars with splitters or lowered suspension. These ramps are used for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 2-piece split design provides ultimate convenience for accessing the vehicle from the side. When a vehicle is secured on the ramp, the incline piece may be removed. The 2-piece design is also convenient for storage and transporting.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 12-inches wide, the maximum recommended tire width to use on these ramps is 10-inches. Weighing just 12 lbs. per ramp (assembled), each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_2-piece_service_ramps.pdf?v=1785641611\" title=\"Manual Two-Piece Service Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311248237,"sku":"MR-MR72-8-SP","price":446.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR72-8-SP_2.jpg?v=1787146048"},{"product_id":"drive-up-service-extender-ramp-67-maxramps","title":"Drive-Up Service Extender Ramp 67\" | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese drive-up ramp extenders pair with either our 67\" 1-piece drive-up service ramp (MR67-10) or the 67\" 2-piece drive-up service ramps (MR67-10-SP). The extenders are designed to lay on top of the 67\" drive-up service ramp's incline to further reduce the drive-up angle to a very gentle 6.6-degrees.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eUse extenders for vehicles with splitters or where the suspension has been lowered.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_service_ramp_extenders_a85986cd-985b-4637-8bf8-f90d80ffb2fb.pdf?v=1785641612\" target=\"_blank\" title=\"Manual Extender Service Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311313773,"sku":"MR-MR67-EXT","price":171.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/Extender_2.jpg?v=1787146050"},{"product_id":"drive-up-service-ramp-67-2-peice-split-design-10-high-maxramps","title":"Drive-Up Service Ramp 67\" | 2-Piece Split Design | 10\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 67\" long drive-up service ramps provide an 10-inch lift for low-clearance vehicles. Designed with a 10.8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 2-piece split design provides ultimate convenience for accessing the vehicle from the side. When a vehicle is secured on the ramp, the incline piece may be removed. The 2-piece design is also convenient for storage and transporting.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 14-inches wide, the maximum recommended tire width to use on these ramps is 12-inches. Weighing just 18 lbs. per ramp, each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese ramps can also be paired with our 67\" Ramp Extenders (part #MR67-EXT) to achieve an even lower angle of 6.6-degrees.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_2-piece_service_ramps.pdf?v=1785641611\" target=\"_blank\" title=\"Manual Two-Piece Service Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311346541,"sku":"MR-MR67-10-SP","price":460.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR67-10-SP_1.jpg?v=1787146053"},{"product_id":"drive-up-service-ramp-67-1-pc-design-10-high-maxramps","title":"Drive-Up Service Ramp 67\" | 1-Piece Design | 10\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 67\" long drive-up service ramps provide an 10-inch lift for low-clearance vehicles. Designed with a 10.8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 14-inches wide, the maximum recommended tire width to use on these ramps is 12-inches. Weighing just 16 lbs. per ramp, each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese ramps can also be paired with our 67\" Ramp Extenders (part #MR67-EXT) to achieve an even lower angle of 6.6-degrees.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_service_ramps.pdf?v=1785803423\" title=\"Manual for One-Piece Service Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311379309,"sku":"MR-MR67-10","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR67-10_3.png?v=1791392872"},{"product_id":"drive-up-service-ramps-extender-56-maxramps","title":"Drive-Up Service Ramps Extender 56\" | MaxRamps","description":"\u003cp\u003eThese drive-up ramp extenders pair with either our 56\" 1-piece drive-up service ramp (MR56-8) or the 56\" 2-piece drive-up service ramps (MR56-8-SP). The extenders are designed to lay on top of the 56\" drive-up service ramp's incline to further reduce the drive-up angle to a very gentle 6.6-degrees.B \u003c\/p\u003e\n\u003cp\u003eUse extenders for vehicles with splitters or where the suspension has been lowered.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_service_ramp_extenders_a85986cd-985b-4637-8bf8-f90d80ffb2fb.pdf?v=1785641612\" target=\"_blank\" title=\"Manual Extender Service Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311444845,"sku":"MR-MR56-EXT","price":166.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/Extender_2_21bf1b22-13e9-4dab-ad5d-411e1ae6d23b.jpg?v=1787146058"},{"product_id":"drive-up-service-ramp-56-2-pc-split-design-8-high-maxramps","title":"Drive-Up Service Ramp 56\" | 2-Piece Split Design | 8\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 56\" long drive-up service ramps provide an 8-inch lift for low-clearance vehicles. Designed with a 10.8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThe 2-piece split design provides ultimate convenience for accessing the vehicle from the side. When a vehicle is secured on the ramp, the incline piece may be removed. The 2-piece design is also convenient for storage and transporting.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 12-inches wide, the maximum recommended tire width to use on these ramps is 10-inches. Weighing just 12 lbs. per ramp, each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese ramps can also be paired with our 56\" Ramp Extenders (part #MR56-EXT) to achieve an even lower angle of 6.6-degrees.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_2-piece_service_ramps.pdf?v=1785641611\" target=\"_blank\" title=\"Manual Two-Piece Service Ramp\" rel=\"noopener\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311510381,"sku":"MR-MR56-8-SP","price":332.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR56-8-SP_1.jpg?v=1787146061"},{"product_id":"56-drive-up-service-ramp-1-pc-design-8-high","title":"Drive-Up Service Ramp 56\" | 1-Piece Design | 8\" High | MaxRamps","description":"\u003cp class=\"MsoNormal\"\u003eThese 56\" long drive-up service ramps provide an 8-inch lift for low-clearance vehicles. Designed with a 10.8-degree incline, these ramps are for muscle cars, imports and high-performance sports cars for general maintenance including oil changes to more intricate modifications to the engine and exterior components.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAt 12-inches wide, the maximum recommended tire width to use on these ramps is 10-inches. Weighing just 10 lbs. per ramp, each pair of ramps supports 3,500 lbs. combined for an overall vehicle weight capacity of 7,000 lbs.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eMade with 100% solid core high density EPS foam and finished with a polyurea coating, these ramps are lightweight but have strength and durability. They stand up to most automotive fluids and chemicals.B \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese ramps can also be paired with our 56\" Ramp Extenders (part #MR56-EXT) to achieve an even lower angle of 6.6-degrees.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0825\/0543\/3347\/files\/MaxRamps_Instruction_Manual_1-piece_service_ramps.pdf?v=1785803423\" title=\"Manual One-Piece Service Ramp\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"MaxRamps","offers":[{"title":"Default Title","offer_id":53766311641453,"sku":"MR-MR56-8","price":299.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/files\/MR56-8_1.jpg?v=1787146063"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0032\/6683\/8574\/collections\/MR67-10_3.png?v=1792541474","url":"https:\/\/www.westcoastcorvette.com\/collections\/maxramps.oembed","provider":"WestCoastCorvette.com","version":"1.0","type":"link"}