Corvette Harness Track Package - Driver & Passenger : C6 2005-2013

SKU: 38110020DS
Availabilityxxx: Usually Ships In 3-5 Days
$1,367.95
FREE Shipping!
Kit Includes:
BLACK BIRD 50” 5-point cam lock RED with Quick Disconnect lap ends with black hardware
Harness Mount Bar
Lap Belt Mount Kit
Fire Extinguisher Mount Kit: The C6 mount conveniently locates the extinguisher in front of the driver or passenger seat.



BLACK BIRD 50” 5-point cam lock RED with Quick Disconnect lap ends with black hardware

Harness Mount Bar:
The C6 harness mount bar has been tested and certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.
The C6 harness mount bar properly locates and supports racing shoulder harnesses relative to the driver. In the case of an accident, it helps protect the driver's shoulders and spine. The harness guides also prevent excessive shifting and fatigue of the driver during the high G loads of cornering and braking. Our bars are easy to install and remove, use only existing holes and mounting points.
Note: Because of mounting locations in the C6, the b-pillar plastic sail panel covers will require two holes to be drilled through them. Brey-Krause provides plastic plugs to cover the holes if the bar is ever removed. Sail panels replacements can be ordered from your GM Dealer, Part 15277640 for driver side, and 15277641 for passenger side if the plastic plugs are not the desired solution. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.
Material: Type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish
Weight: 17.3 lbs.
Models: ‘05+ C6 Coupes and ‘06+ Z06 Coupes
Installation: Bar attaches to factory mounting points in "B" pillars.

Lap Belt Mount Kit:
Material: 304 Stainless Steel Finish:
Satin finish stainless steel.
Weight: 1.6 lbs. Models: ‘05+ C6 Coupes and ‘06+ Z06 Coupes
Installation: Secure snap-in belts to factory seat belt mounting points.
Miscellaneous: Will not disable use of factory belts.

Fire Extinguisher Mount Kit:
Material: Type 304, stainless steel.
Finish: Powder-coated in durable black wrinkle-finish.
Weight: 1 lb. 9 oz.
Models: C6 Corvette
Installation: Attaches to factory seat track hardware.
Miscellaneous: Holds one 2.5lb. extinguisher.
Top
Loading...