 |
| C5/C6/Z06 MSD 8.5 Super Conductor Wires - Set (8) |
| Outperform the competition with these 8.5mm super conductor wires. They offer the lowest resistance without any electrical interference. Over 40 feet of copper alloy conductor wire is tightly wound on to a foot of wire. This procedure produces an effective “choke” method, and therefore is not able to interfere with any of the electronics on your vehicle. |
|
Regular Price: Price: $69.95
Discount Price: $62.96
|
|
|
|
|
|
 |
| C5 Inner Fender Stainless Steel Covers |
| These polished covers are made from Type 304 stainless to match the material used in all our other cosmetic covers. Each piece is formed to follow the inner fender. It attaches to the inner fenders with velcro which is provided in the kit. By using velcro that can easily be removed if the owner wishes to see the decals that appear on each inner fender. |
|
Regular Price: Price: $129.95
Discount Price: $116.96
|
|
|
|
|
|
 |
| C5 Under-The-Hood Light Polished Stainless Steel Cover |
| Here is a nice dress up item for under the hood that
fits every 1997-2003 Corvette!
This gives the under the hood a nice finishing touch
to compliment any of the other under-the-hood items
you may offer your customers.
It simply slips around the factory hood light giving
it a nice bright polished stainless edge around the
light.
Easy to install. Comes with directions. Polished
stainless cover installs without removing the factory
light from the hood. |
|
Regular Price: Price: $23.95
Discount Price: $21.56
|
|
|
|
|
|
 |
| C5/Z06 Billet Gauge Bezel Set |
| Give your gauge cluster that special touch to set it apart from the rest. Our gauge bezels are precision machined from 60-61 aircraft aluminum in a four-step process. Then each bezel is anodized to prevent oxidation and to provide a uniform satin finish. Each set comes complete with individually packaged bezels for the speedometer, tachometer, fuel gauge, temperature gauge, battery gauge, oil pressure gauge and a tube of adhesive for mounting the bezels. *Bezel kit does not include White Gauge Face kit. |
|
Regular Price: Price: $90.95
Discount Price: $81.86
|
|
|
|
|
|
|
 |
| C5 Auxiliary Hood Seal |
| Keep water and dirt out of your engine compartment, with this hood seal. |
|
Regular Price: Price: $13.95
Discount Price: $12.56
|
|
|
|
|
|
 |
| C6 Corvette Insulated Windshield Sunshade |
| The Ultimate Insulated windshield sunshade for Corvette - Folding accordion design - custom-fit specifically for Corvette - fits into the corners of the winshield blocking the sun completely from the dash - reduces interior temperature, protects interior from sun's rays - sun visors hold the shield in place - one side is silver reflective fabric and the other side is finished in soft felt - both fabrics are laminated to a form core board which acts as an insulator to help reduce heat build-up inside the vehicle |
|
Regular Price: Price: $64.95
Discount Price: $58.46
|
|
|
|
|
|
 |
| C5/C6 Brake Reservoir Polished Stainless Stel Cover |
| This polished stainless cover is made from Type 304 stainless. It is a two piece design that extends down the exposed side facing the engine. Attached to the bottom half is a protective molding. The entire cover assembly can easily be removed to check brake fluid levels. This side is vented similar to our other polished stainless parts. (Note the cap shown in the photo is not included in this kit. That is part number #12101309). The above design is the production design. |
|
Regular Price: Price: $89.95
Discount Price: $80.96
|
|
|
|
|
|
 |
| C5 Front Insert Panel Stainless Steel Cover |
| This polished cover is made from Type 304 stainless.
Each one comes with all new hardware. It attaches to
the front leading edge of your bumper cover which is
visible when you open your hood. It is another way to
further enhance the appearance under your hood. Since
it is the same exact size as the body lip it will fit
with virtually every version aftermarket intake
available. |
|
Regular Price: Price: $79.95
Discount Price: $71.96
|
|
|
|
|
|
